Encoders Rear
Encoders Front
Holster Switches
Rear
Sump float switch
Holster Switches
Front
1
2
3
4
5
6
The following cables have to be connected to the Multiplexer module located under
the Head Cabinet:
−
Encoder cables;
−
Holster switch cables;
−
Float switch cable.
• Connect the cables according to the following diagram.
Figure 24. Multiplexer Module Connection Guide
• Check all hydraulic and electrical connections.
• Fit the protective covers once the commissioning process has finished.
• External cladding can be fitted now.
Refer to Section 2 for instructions on the wiring of VR proportional valve cables and
Fafnir vapour sensor cables.
2A03229 APOLLO 3000L Installation and Commissioning Manual Issue 1
24
APOLLO 3000L INSTALLATION
