22
01.02.2021
Cod. 80005840a - GB
•
Remove the air outlet baffle [3].
•
Remove the air intake baffle [4].
•
Clean the removed components and side
-
walls [5].
•
Reposition the pieces by following the reverse or-
der.
Do not reverse the air intake baffle with the air out-
let one.
7.5 Cleaning the internal bottom surface of the casing
________________
Use soft microfiber or cotton cloth soaked with
lukewarm water (max. 35° C). If there are halos, add
some neutral diluted detergent (pH 6÷8). Rinse and dry
with a soft and dry cloth. Use a specific product for the
stainless steel display deck.
Do not use
corrosive deter-
gents, thinners, alcohol or solvents.
Do not use hoses connected to the water system
to wash the unit. Do not use direct or indirect water jets
or machines for pressure cleaning (i.e. high pressure
washers).
•
Remove display decks [1] by using the supplied
tool [2].
•
Vacuum any residue in the casing.
•
Clean the air grills [3], the evaporator cover [4], the
fan holders [5] and the insulated casing [6], paying
attention not to wet the electrical parts.
•
Reassemble the parts by following the operations
in the reverse order.
7.6 Cleaning the condenser
____________________________________
Use a brush with hard bristles and a vacuum
cleaner.
The aluminium fins of the condenser can cause
injuries to the hands and arms; use protective gloves for
cleaning these parts.
1
1
2
2
3
4
5
3
6
3
4
5
7. User’s Maintenance
Summary of Contents for Viessmann Tecto CI1 Series
Page 38: ......
