GALILEI Viessmann Tecto CI1 Series, User Manual

Page: 16 / 40

16 01.02.2021 Cod. 80005820a - GB
5.2 Unpacking
______________________________________________________
The unit is delivered in a packaging made of a Europallet and a cardboard box (see Chapter 4 “Transportation and
handling”). Once the cabinet is placed on the installation point, make sure that the packaging is integral and undam-
aged. If there is any damage caused by transportation, take a photo of the damage and report it to the supplier.
Wear suitable PPE (i.e. protective gloves, glasses and safety shoes). Use strong scissors (i.e. electrician’s scis-
sors or bolt cutters) to cut the strings. Remove the strings, lift the cardboard box and remove it.
Remove the plastic strings that fix the cardboard box to the wooden Europallet. Caution! The strings are tight-
ened and, when they are cut, there can be a “whip effect” that can be hazardous. Proceed with caution and do not cut
the strings while standing in front of them.
Packaging is mostly made of recyclable materials (wood and cardboard and small amounts of plastic film). Do
not dispose of them in the environment! Please refer to the local regulations in force for the correct disposal of the
materials and deliver them to a suitable disposal centre.
Remove the screws that fix the metallic brackets which block the feet and wheels (see images below). Now it is
possible to remove the unit from the Europallet and place it on the floor.
5.3 Feet/supports adjusting
__________________________________________
Before starting the unit for the first time, adjust the feet so that the unit is stable and perfectly horizontal . Lev-
elling will guarantee the proper drainage of the defrost water as well as a noiseless and smooth operation of the unit.
Adjust the levelling feet (if any) and check the horizontal alignment by using a spirit level on the length and the width of
the refrigerated cabinet.
5. Setting up the unit