21
01.02.2021
Cod. 80005840a - GB
7.3 Cleaning the sliding glasses and the front glass
_____________________
Use a soft and non
-
abrasive cloth with neutral de-
tergents (pH 6÷8) for cleaning and a soft and dry cloth for
drying.
Do not use
abrasive products or metal scrapers
that may scratch the glass. Do not use corrosive deter-
gents, thinners, alcohol or solvents which can damage
the plastic seals and the painted parts of the frame.
Do not use hot water on cold glass as it can break
and be dangerous for the operator.
To remove the sliding glasses:
•
Slightly lift up the upper glass [1] from the side
which is not bound by the plastic guide, remove
the glass from the slot, paying attention to not drop
it.
•
Lift up the lower glass [2].
•
For the refrigerated cabinet without sliding glasses,
it is possible to extract the front glasses [3]. Re-
move the glass stopper screw [4], if any. Extract
the glass from the frame profile by lifting it up from
both sides.
•
Reposition the pieces by following the reverse or-
der.
7.4 Cleaning the acrylic glass parts
______________________________
Use soft microfiber or cotton cloth soaked with
lukewarm water (max. 35° C). If there are halos, add
some neutral diluted detergent (pH 6÷8). Rinse and dry
with a soft and dry cloth.
Do not use
corrosive deter-
gents, thinners, alcohol or solvents.
For cleaning completely the acrylic glass parts:
•
If present, remove the anti
-
demisting acrylic glass
[1] by unhooking the front part of air outlet baffle.
After that, the anti
-
demisting acrylic glass returns
to its original flat shape. It shall be curved in phase
of repositioning.
•
Remove the side anti
-
demisting acrylic glass [2], if
any.
1
2
1
2
3
4
7. User’s Maintenance
Summary of Contents for Viessmann Tecto CI1 Series
Page 38: ......
