12
5.3 Valve Selection
This section does not apply to the DC1-& DC1S
models
Program an irrigation schedule for each
valve individually.
First select the desired valve, and then
program a schedule as follows:
1. Press "Enter"
until "Valve"
appears.
2. Press "Set"
. A blinking arrow
appears at the bottom of the display.
3. Move the arrow to the desired valve number by pressing
“Plus”
and “Minus”
button
.
4. Press "Enter"
to proceed to the next step.
5.4 Setting the Irrigation Duration
This setting determines how long the irrigation lasts.
1. Press "Enter"
until "Duration"
appears.
2. Press "Set"
. The hour digits blinks. Set the desired number
of hours by pressing “Plus”
or “Minus”
button
.
Press
"Set"
again - the minute digits
blinks. Set the desired number of
minutes by pressing “Plus”
or
“Minus”
button.
3. Press "Enter"
to proceed to the
next step.
valve
duration
days
starts
now
manual
DC4
