18
2. Press "Enter"
until "Days" appears
.
3. Press "Set"
a number of times (for all the days of the
week) until OnCE appears blinking on the display.
4. While the display is still
blinking, press “Plus”
or
“Minus”
until “5 days” appears on the display,
representing
the irrigation frequency .
5. Press "Enter"
. "STARTI" is displayed.
6. Press "Set"
. The hour digits blink.
7. Set starting
hour&minute, using “Plus”
or “Minus” as
described in section 6.3.
6.5
”Manual”
Irrigation System Operation via the
Irrigation Controller
This function operates the selected valve for the irrigation duration.
The valve will close automatically at the end of the irrigation
duration.
NOTE that the originally programmed
irrigation schedule continues to operate
at the set times.
1. Press "Enter"
until "Valve"
appears. Select one valve as described in
Section 5.3: “Valve
Selection”.
2. Press "Enter"
until "Manual option"
appears.
3.
Press “Plus”
to open the valve. The
word
“ON”
is displayed. After an interval of
5 seconds, a count down of the remaining
irrigation duration appears on the display.
To close the valve manually press
“Minus”
. "0FF" appears on the display.
