14
5.6 Setting Irrigation Start Times
In this step, up to 4 separate irrigation start times can be
programmed for selected days, for the valve being programmed.
The selected valve will open at each of the start times set, for the
irrigation duration set as described in Section 5.4.
1. Press "Enter"
until the "STARTI" appears. The word
"OFF" or the last start time set will appear on the display.
2. Press "Set"
. The displayed item
blinks ("OFF" or last start time entered).
3. Set the desired start hour by pressing
“Plus”
or “Minus”
.
Take note of the AM and PM designation.
Repeat actions 2 and 3 to set start times
"Il", "Ill" and "IV", as needed.
4. To cancel a specific start time, select it by
pressing "Enter"
Next, press "Set"
. The hour digits
blink. Press “Plus”
or “Minus”
until the word "OFF"
appears on the display.
5. To program another valve, select it, and repeat the above steps,
starting from section 5.3 above.
5.7 Example: Programming a Weekly Irrigation
Schedule
Let’s assume you want to program the irrigation controller to water
three times a day using the 24 hours time display format: at 08:00,
13:00 and 19:00, for two and a half hours at a time, on Tuesday and
Friday.
To switch to an 24 hours time display format, see section 5.2.
(If you are using a DC-1 model irrigation controller, start from step
4 below.)
