20
6.7 Suspension
This option is used to temporarily suspend the irrigation controller’s
control of the valves, for example, while it is raining. The irrigation
schedule remains stored in the controller, but is not implemented.
The suspension option disables ALL
valves connected to the irrigation
controller.
1. .Press "Enter"
until the "Clock"
appears.
2.
Press and hold down “Minus”
for
5 seconds.
"No Irrigation"
appears blinking at
the bottom right of the screen. The controller is now suspended.
3. To restore control to the controller, press "Enter"
until the
"Clock"
appears, and then press and hold
down “Minus”
until the "No Irrigation"
disappears.
4. Suspension can also be implemented while a valve is activated.
5. If an attempt is made to operate a valve manually while the
irrigation controller is suspended, or when a valve is meant to
open sequentially, the word “rAin” appears o
n the display, and
the valve does not open.
6.8
Irrigation Duration Extended or Shortened by a
Specified Percentage
You can extend / shorten the irrigation duration for all the valves
simultaneously by specifying a percentage for the duration.
Example: if the irrigation duration has been set to one hour, adding
10% extends the duration by 6 minutes (to 66 minutes).
