A.G.C
. - from this page it is possible to set the parameters of the Automatic Gain Controller.
AGC Bypass
- from this screen it is possible to set the AGC On or OFF, so to activate it or not
without resetting the all parameters, use the “PARAMETER” encoder for toggling the AGC Bypass
On/Off.
The following is an example screen for the “AGC Bypass” page where the AGC is set Active:
AGC Exp Time
- from this screen it is possible to set the AGC Expansion time from 0.057 seconds
up to 14.4 seconds, use the “PARAMETER” encoder to set the value.
The following is an example screen for the “AGC Exp time” page where the Expansion Time is set
to 1.5s:
AGC Cmp Time
- from this screen it is possible to set the AGC Compression time from 0.014
seconds up to 6 seconds, use the “PARAMETER” encoder to set the value.
The following is an example screen for the “AGC Cmp time” page where the Compression Time is
Set to 0.5s:
Ch.A A.G.C.
< Bypass = ON >
Ch.A A.G.C.
< Exp Time = 1.5s >
Ch.A A.G.C.
< Cmp Time = 0.5s >
16
