AGC Exp Thr
- from this screen it is possible to set the AGC Expansion Threshold from -70 dBu up
to the Hold Threshold Value, by using the “PARAMETER” encoder to set the value.
The following is an example screen for the “AGC Exp Thr” page where the Expansion Threshold is
Set to -50dBu:
AGC Cmp Thr
- from this screen it is possible to set the AGC Compression Threshold Value up to
0dBu, by using the “PARAMETER” encoder to set the value.
The following is an example screen for the “AGC Cmp Thr” page where the Compression Threshold
Is set to -3dBu:
AGC Thr Hold
- from this screen it is possible to set the AGC Threshold of the AGC Signal “Hold”
area, from -69 dBu up to -1dBu, by using the “PARAMETER” encoder to set the value.
The following is an example screen for the “AGC Thr Hold” page where the Threshold of the Signal
“Hold” area is set to -40dBu:
Ch.A A.G.C.
< Exp Thr = -50dB >
Ch.A A.G.C.
< Cmp Thr = -3dB >
Ch.A A.G.C.
< Thr Hold = -40dB >
17
