When storing an edited configuration for the DS-CP22, select the location for a preset from the
16
available
by using the “PARAMETER” encoder.
Once the desired location appears on the screen press ENTER again to reach the “
Edit Name
Preset
” page.
If the location number 30 is ok, in example, then the screen will be the following:
In this page, the User can enter a Preset Name (
up to 16 Characters
) by using the “PARAMETER”
Encoder to choose a character and the “NAVIGATION” encoder to move between the 16 available
Locations for the character’s positioning.
The current position of the cursor is shown by a “blinking underscore”.
To store the Preset Name press the “ENTER” button again.
The above action will take you to the “
Enter to Save
” page showing the selected location for the
preset and the final edited name, for example LightCmp:
Pressing “ENTER” again, you will store the preset in the selected location with the chosen name
and the following transitory screen will appear on the LCD:
Once the preset is saved, the DS-CP22 will go back to the previous level.
Edit Name Preset
30: _preset name
[Enter] to Save
30: LightCmp
Wait : Saving . . . . . .
30: LightCmp
Preset 30: LightCmp
Save Preset
12
