28
4). TX Function Setting
Item
Title
Content
Description
1 Transmit
Mode
1. Non-continuous
2. Continuous Never
off
3. 30 sec. to 10 min.
off
Non-continuous:
After “Power-On”, the
Transmitter will work when operate Joystick
or the pushbutton is pressed. Using this
mode can save the power of Transmitter.
Continuous Never off:
Transmitter will
continuously transmit signal after “Power-
On”
Continuous due time off:
Transmitter will
transmit signal continuously after “Power-
On”, and stop sending if no pushbutton
pressed within selected time.
2 Powersaving 1. Enable
2. Disable
Enable:
By using firmware to control
frequency transmission cycle period, thus to
reduce power consumption of Transmitter.
Simultaneously, the operating distance will
be decreased when the “Powersaving” mode
is enabled.
Disable
: Disable this function.
3 Auto Off
4. Enable
5. Disable
Enable:
When Transmit Mode is for
continuous, it will send an EMS signal to
“Power-off” the Receiver if it is set auto off in
a certain time.
Disable
: Disable the function to send EMS
signal to Receiver before the Transmitter is
off.
4 Normal OP
LED
1. On
2. On Every 0.3V~4 sec.
3. Off
On:
LED indicator will lighten with green
color when Transmitter is transmitting. It still
works for warning and fault indication with
first priority.
On Every 0.3~4 sec.:
LED indicator is
flashing with green color every 1~4 sec.
Off:
LED indicator will not work during
normal operation in order to save power. But
it is still available for warning and fault
indication.
5 Normal OP
LED
1. LED-off
2. LED-on
LED-off:
LED indicator will not work during
normal operation in order to save power. But
it still available for warning and fault
indication.
LED-on:
LED indicator will lighten with
green color when transmitter is transmitting.
It’s still available for warning and fault
indication with first priority.
