P a g e
|
23
o
WEEB® Grounding Lug
o
WEEB® 1/4
"
-20 Hex Cap Screw, SS (WEEB® Terminal Screw)
o
5/16
"
-18 Flange Nut, Zinc.
Initially, place the flange nut loosely over the hex cap screw.
•
Slide the WEEB® assembly into the slot of the MLPE foot & center it (Figure 19).
•
Slide the MLPE under the WEEB® washer & tighten the flange nut to 10 ft-lbs. to
ensure proper grounding.
Step 1c: Ensure Proper Wire Management...
Route the negative wire (female) through the hollow of
the end solar mounting foot and then secure both the positive (male) and negative wire to
the frame using UV-resistant solar wire ties (Figure 20, next page).
Figure 18: Parts of the WEEB
®
Grounding Assembly
5/16
"
-18 Flange
Nut, Zinc
WEEB
®
Grounding Lug
WEEB
®
Terminal
Screw
WEEB
®
Washer
5/16
"
External
Tooth Washer
5/16
"
-18 x 0.750
Hex Cap Screw,
Zinc
MLPE Feet
Figure 19: Attaching the WEEB
®
Grounding Assembly
WEEB
®
Grounding
Assembly
