www.g-lites.com
8
5
、
INSTALLATION
5
.
1 Installing/replacing the lamp
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
For the installation, you need one HSD250/MSD250 lamp.
Protection gloves, helmet with sight, leather apron
CAUTION!
The lamp has to be replaced when it is damaged or deformed due to the heat!
The lamp life given by the manufacturer must never be exceeded. This is why you need to
take notes on the operational time of the lamp and replace the lamp in time.
Keep exchanged lamp in a protective
container and remove accordingly.
During the operation, the lamp reaches
temperatures of up to 600
℃
.
Before replacing the lamp, unplug
mains lead and let the lamp cool down
(approx.10 minutes).
During the installation do not touch the
glass-bulbs bare-handed! Please follow
the lamp manufacturer’s notes!
Do not install lamps with a higher
wattage! Lamps with a higher wattage
generate temperatures the device was
not designed for. Damages caused by
non-observance are not subject to
warranty
Procedure:
Step 1:
Unscrew the fixation screws of the lamp cover and remove it.
Step 2:
Unscrew the knurled-head screws of the lamp holder and remove it.
Step 3:
If replacing the lamp, remove the old lamp from the lamp holder.
Step 4:
Insert the lamp into the lamp holder.
Step 5:
Replace the lamp holder and tighten the knurled-head screws.
Step 6:
Adjust the lamp as described under lamp adjustment.
Step 7:
Replace the lamp cover and tighten the fixation screws.