![background image](http://html1.mh-extra.com/html/g-lites/250s/250s_user-manual_3075361011.webp)
www.g-lites.com
11
Make sure that the device is fixed properly! Ensure that the structure (truss) to
which you are attaching the fixture is secure.
The moving head can be placed directly on
the stage floor or rigged in any orientation on
a
truss
without
altering
its
operation
characteristics (see the drawing).
For overhead use, always install a safety rope
that can hold at least 12 times the weight of
the fixture. You must only use safety ropes
with screw on carbine. Pull the safety rope
through the hole on the bottom of the base
and over the trussing system etc. insert the
end in the carbine and tighten the fixation
screws.
Use the safety rope exclusively as a closed
ring. Never use by only securing at each end.
The maximum drop distance must never
exceed 20cm.
A safety rope which already hold the strain of a crash or which is defective must not be used
again.
(1) Omega-holders
(2) Clamp
(3) Safety-rope
(4) Quick-lock fastener
Screw one clamp each via a M12 screw and nut onto the Omega-holders.
Insert the quick-lock fasteners of the first Omega-holder into the respective holes on the
bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the second
Omega-holder.
DANGER
Before taking into operation for the first time, the installation has to be
approved by an expert!