Section 50
00-02-1031
2019-08-07
- 17 -
Event History Screen
The history of the last 32 events is displayed on this screen,
with the most recent at the top of the list and the oldest at
the bottom.
The number displayed in the top right corner indicates how
many entries are in the list.
Events include shutdowns, starts, stops, resets, etc.
The user easily can view the events (alarms, etc.) logged
before and after a shutdown.
Each event is displayed with the event label on one line
and the real time clock and hour meter reading on the
following line.
Active Alarm Screen
All active alarms and warnings will be displayed on this
screen.
Unacknowledged alarms will be preceded by an asterisk,
and acknowledged alarms will clear the asterisk.
Pressing ACK on this screen will acknowledge all active
alarms.
The top right corner will indicate the number of alarms and
which line the cursor is currently on. Example: 3/10
indicates 10 alarms, and the cursor is on line 3 of the list. A
maximum of twenty (20) active alarms will be displayed.
NOTE:
Alarms are warnings based on setpoints
and/or digital inputs which are separate from
shutdowns that allow the equipment to continue to
run.
Alarm / Shutdown Banner
This screen shows the alarm / shutdown annunciation as it
will appear on most Operating Status screens.
The message(s) will be visible at the bottom line of the
status screen area and then briefly clear once a second.
This will continue until alarms are acknowledged and/or
shutdowns are cleared.
If there is more than one unacknowledged alarm active,
each alarm will be displayed for one second each until
acknowledged.
Pressing the Fn key followed by the ACK key will switch to
the active alarms screen.
