Section 50
00-02-1031
2019-08-07
- 32 -
Temperature Inputs Setup Screen
The actual temperature reading in degrees will be shown
per channel.
For all configured temperature devices, the user may edit:
a) Temperature
: The actual measured sensor reading.
b) Status:
Real-time display of any wire faults that may
exist for the sensor.
c) Last Status Error:
The last detected wire fault for the
sensor, use this record to troubleshoot intermittent
faults, this line will hold the last recorded error.
d) Type.
Identify whether the input type should be set to
one of three types: J thermocouple, K thermocouple or
100 OHM Pt RTD.
NOTE
: for MX4-R2 even channels can only be selected
as J thermocouple or K thermocouple
e) Offset.
Assign an optional thermocouple reading offset
value.
