Future Design MCTB 4.3, User Manual

Page: 238 / 240

MCTB
238
A.10 Support and Warranty Information
SOFTWARE VERSIONS FOR FDC- MCTB Control System
The software version levels for the MCTB Control system can be viewed in the offline system setup, from the
System menu; select
“About”. Both the HMI (Human Machine Interface – color touch screen) and loop/limit
control firmware and software versions will be displayed.
When obtaining replacement parts or to get assistance for setup and/or troubleshooting purposes, it is important
to have this information available to insure that your request is processed properly and in a timely manner. It
is recommended that this information be written down and kept in a readily accessible location along with this
manual, so that it is available when required.
CE Net Version:
CE Image Version:
HMI Version:
CE BSP Version:
Loop 1 Version:
Loop2 /Limit Version: Loop3 /Limit Version:
SmartIO Monitor Module Version:
The CE Net version of the HMI, and firmware versions of the loop and limit controls of the
MCTB control system are proprietary and only available directly from Future Design Controls.
Using similar or like components obtained from a source other than Future Design Controls
will cause unexpected operation and/or malfunction of the MCTB control system. Any
attempts to do so will be at the user’s own risk and void any and all claims or warranties with
Future Design Controls.
In addition, installing Future Design MCTB software on hardware not obtained directly from
Future Design is a violation of the software license agreement. See the Future Design
Software License agreement on the following page. By installing and/or using the MCTB
Control System, you are accepting the terms of the software license.