Future Design MCTB 4.3, User Manual

Page: 109 / 240

MCTB
109
Under ramp rate operation, when a set point is entered, the loop starts the ramp from the current process value
and then continues to the target set point according to the rate up or rate down entry made on the set point
Limits screen (see section
9.3 Setpoint Limits). The target set point, ramp rate and deviation hold entries can
be viewed at any time by pressing the SP tag for the loop.
Pressing the “OK” button will close the dialog window and return to the Loop view screen. The Overview screen
indicates a loop under ramp conditions by displaying the target set point in parenthesis after the actual loop set
point.
Press SP tag to
view ramp rate
settings.