Page 14 of 17 // Installation Instructions - EAD3
Infrared (IR) Remote Control Button Layout
IMPORTANT
Only buttons indicated above are functional with the product. Any other button press will STOP the
mechanism.
IN -
Brings the mechanism into
the cabinet.
OUT -
Brings the mechanism
out of the cabinet, without
swivelling.
STOP -
Will stop the operation of
the mechanism at ANY position.
Mechanism Control
2 - Infrared (IR) Operation
This Mechanism can be controlled via the supplied 14 button Infrared (IR) Remote Control, pair with the supplied
Infrared (IR) lead and sensor.
The mechanism's functions can be controlled by plugging the Infrared (IR) lead and sensor into the 3.5mm IR
Input Jack shown on the General Mechanism Control page.
Confi rmation of Infrared (IR) input will be shown by a single fl ash of the large green LED located on the end of
the control box.
As Infrared (IR) control works over line of site, the Infrared (IR) sensor must be directly viewable from what ever
location the remote control is being used from.
