Page 10 of 17 // Installation Instructions - EAD3
Installation Instructions
4 - Screen Position Adjustment
A
DETAIL A
SCALE 1 : 2
Screen Tilt Adjustment
Horizontal
Adjustment Lock
Off
Mount Bars
1. Once the screen has been attached to the EAD3, it can be adjustment horizontally by sliding the screen and
Uprights left or right along the stainless steel Mount Bars shown below. The s lots in the Screen Uprights
(1.4) allow for vertical position adjustment by loosening screen fixings and raising or lowering screen to the
desired position.
2. Tighten of the lower 2 fixings on the rear of Main Uprights (1.8) will lock off horizontal adjustments.
3. The top fixings on the rear of the Main Uprights (1.8) can be adjusted in or out to alter the tilt angle of the
screen (up to ±5º).
1.4
1.8
