Stránka
26
z
39
Holding the
shift
key allows moving the model freely.
4 Mirror
Allows to inverse a model thru selected plane of mirroring.
5 Scale
Tool for dimensions size change.
6 Rotate
Allows model rotation around selected axis.
7 Support generation
Serves as a support for surfaces, which forms an acute angle (smaller than 30°) with
the platform. It is also necessary to support models, which abuts against the platform
with a flat surface.
It is not suitable to use automatic support generation. Manual setup is recommended.
You can see an example recommended support setup in the picture below.
Manual placement / Automatic generation
