Stránka
31
z
39
Fill-in the folder name with content for printing and layer height consistent with preset
slicer in the text file „config“ at USB. Set required exposition times according to the chart.
This setting does not have to be consistent with slicing profile.
PRINTING
// FOLDER NAME / EXPOSITION TIME /
EXPOSITION TIME OF THE FIRST LAYERS / LAYER
HEIGHT ACCORDING TO CHART / VALUE CHART FOR
LAYER HEIGHT SETTING
It is important to thoroughly clean the
mirrors and tank bottom before printing.
Surface soil may result in printing defects.
1.
Properly shake the printing material
before opening. Then pour sufficient
amount into the tank.
2.
Make sure the tank is properly fastened
with eccentric levers. Platform lock-out
screw has to be tightened too.
