Stránka
34
z
39
4.
Pour unused material back to bottle
thru a sieve.
5.
Clean everything thoroughly for
next printing.
If the model parameters are set correctly, printing difficulties do not occur. Not always
is exact data matrix for printing of desired model available, though.
The tank has limited durability, which is significantly influenced by cleaning and
manipulation method. Properly used the tank should last for more than 100 printings.
Major risk in tank manipulation is mechanical damage. Do not use sharp scrapers for
residue and soil removal from the bottom of tank.
Use protection work instruments when interacting with photopolymer, especially
advisable are gloves. Keep your workplace always clean. If you do not print, always
remove photopolymer from the tank to avoid damage and degradation of optical
qualities of bottom plate.
