Stránka
9
z
39
ELECTRIC PART OF DEVICE MUST OT BE CLEANED BY SPRAYING WATER!
•
Protection measures must be kept flawless
•
Keep safety marking on the device clean
•
Unconditionally follow safety instructions mentioned in this manual
•
Before you start any usage of the device read this manual carefully as well as any
other manuals from partial devices
•
Carry out checks of protection measures, like limit switches, cover functionality etc.
on weekly basis
•
In case device starts to unusually strongly oscillate or emits increased noise or other
symptoms, which are not usual for its operation – shut the device down and arrange
immediate check
•
Do not use any kinds of open fire
•
Never operate the device if physically or mentally tired
•
Do not start the device without covers
•
Open electric switch-board covers only after unplugging the device from grid
•
Damaged device must not ever be started
•
Workers performing operation and maintenance of this device must provably hold
knowledge contained in this document
•
Work only under good light conditions or arrange sufficient artificial light
•
Wait for all movable parts to stop before removing any part of device
•
Operator performs visual check on movable parts if they do not show any signs of
exceeding wear-out, or possible damage, before he starts work
•
Always make sure that all protection measures are mounted and that they perform
flawlessly
•
With exceedingly wore-out or damaged parts this device cannot be used
•
Adjustments, maintenance and cleaning of device carry out only if unplugged from
electric outlet
•
Device can be operated only by 18-year-old or older workers, mentally and physically
fit, provably trained and authorized to operate the device
•
All maintenance, repairs and adjustments of device must be performed when the
device is stopped and secured
•
Replacement of damaged parts entrust to professional, only original parts can be
used for replacement
•
Always ensure sufficient workspace, unobstructed access to control panel of the
device and sufficient light is provided
•
Device is for indoor use only
•
Device, if not used, must be stored in dry environment
•
Damage caused to 3D printer due to violation of instructions contained in this
manual forfeits right for warranty
•
For property damage caused by incompetent use of printer in discrepancy with this
user’s manual or by violation of safety regulations is fully liable user of this device.
•
Danger of burn injury and possible bodily injury! Be most careful!
•
This device is not a toy! Protect from children!
•
Never leave the device operate unattended!
•
Beware of hot parts of printer over 70°C! Flash burn danger!
•
Make sure product is complete before usage.
•
Do not put heavy object on printer.
