17
Before Using
Mechanical ATL Adjustment
Adjustment
Using a Phillips screwdriver, adjust the
trigger brake (back) side stroke by turning
the screw through the adjusting hole indi-
cated by the arrow in the figure. (The
screw moves the throttle trigger stopper.)
- When the adjusting screw is turned clockwise, the
stroke becomes narrower.
Make this adjustment when you want to make the throttle trigger brake (back) side
stroke narrower.
Mechanical ATL
adjusting screw
Caution
When the stroke was adjusted, the throttle servo travel must be adjusted by data set-
ting.
Wheel Tension Adjustment
Make this adjustment when you want to change the steering wheel spring tension.
Adjustment
Turn the screw inside the adjusting
hole using a 1.5mm hex wrench.
Caution
If turned too far counterclockwise, the adjusting screw may fall out.
Tension adjusting
screw
- Turning the adjusting screw
clockwise, increases the spring
tension.
