15
Before Using
Transmitter T3PK
Nomenclature
Antenna
Throttle trim
(DT2)
Edit buttons
Steering wheel
Steering trim (DT1)
LCD screen
Push switch 1 (PS1)
Power
switch
Digital trim 3 (DT3)
Pilot lamp
CH3 knob
( DL3)
Mechanical ATL
adjusting screw
Throttle
trigger
(See page 16 for the operating
instructions.)
(See page 16 for the operating instructions.)
(See page 17 for the
adjustment instructions.)
(See page 16 for the operating
instructions.)
Grip Handle
Push
switch 3
(PS3)
Crystal
Display
switch
Steering dual rate dial (DL1)
(See page 16 for the operating instructions.)
Push switch 2 (PS2)
ATL dial (DL2)
(See page 16 for the operating instructions.)
*The switches, knobs, and trimmers in the
figure are shown in the initial setting position.
Precautions when turning the power
switch on and off.
When the data was changed using the edit
keys or trim levers, wait at least two seconds
before turning off the power. If the power is
turned off within two seconds after the data
was changed, the new data will not be written
to memory.
Sound port
- Use a commercial earphone.
(Use a radio earphone with a 3.5mm di-
ameter plug.)
- When the surroundings are noisy during
races, etc., you can listen to the alarm
tone using an earphone. The alarm tone
can also be heard from the transmitter.
