25
Before Using
Changing wheel position
Modifying for left-hand use
1. Connect the wheel unit con-
nector through the offset
adapter. Install the adapter
using four 2.5mm hex bolts at-
tached.
2. Reinstall the wheel unit,
wheel unit cover, wheel, and
wheel cap in same position
as they were removed.
1. Remove the wheel back cover
using 2.5mm hex wrench.
2. Push the wheel unit connector
in the opposite side.
3. In opposite side, connect the
wheel unit connector and rein-
stall the wheel unit, wheel unit
cover, wheel, and wheel cap
in same position as they were
removed.
