14
Before Using
Set Contents
After opening the box, first check if the contents conform to the following. The con-
tents depend on the set as shown below.
- If any of the set contents are missing, or you have any questions, please contact you
dealer.
Transmitter
T3PK
RF module
PK-FM
Receiver
R203HF(HRS-FM) or R113iP(PCM)
Servo
Miscellaneous
Transmitter Ni-cad battery pack NT8F700B
or Battery box
*Installed in transmitter.
Receiver switch
Wheel position offset adapter(A.P.A.)
Instruction manual
*Installed in transmitter.
Always use only genuine Futaba transmitter, receiver, FET amp, Ni-cad battery and
other optional parts.
Futaba will not be responsible for damage caused by other than genuine Futaba parts and components. Use only
the genuine Futaba parts and components listed in the instruction manual and catalog.
Caution
In case of the High Response System (H.R.S) receiver R203HF, always use only the
following conditions:
Servo; 6V type Digital Servo only
Power supply; 6V Nicd battery
Transmitter setting; "HRS" mode
If the conditions are different, control is impossible.
And
Fail Safe Unit (FSU1)
is not available.
Caution
