29
Initial Set-Up
Initial Set-Up
Preparations (Transmitter)
Before setting the transmitter functions, check and set items 1 to 3 below.
(Display when power switch turned on)
When the power switch is turned on, the currently selected model number is dis-
played. Check if this number is the model number you want to set-up. To change the
model number, use the Model Select function (page ).
Turn on the transmitter power.
1. RF Output Check
If signals are output normally, RF output monitor "RF"
will be displayed on the screen.
If RF is not displayed, check if the transmitter crystal and
RF module are installed.
If the transmitter is abnormal or faulty, contact your
Futaba dealer.
The model number is displayed.
(Start screen)
"RF"
