Manual Introductory Section
TRANSMITTER RF MODULE
The PCM 1024Z transmitter is designed to work
with either the FP-TK-FM or the FP-TK-FSS fre-
quency-synthesized Radio Frequency ( R F ) mod-
ules. Other modules may not be used.
It is normal for the module's temperature to
rise during operation.
To remove the module, press
inwards on the top and bottom
tabs and simultaneously pull the
module away from the rear of the
transmitter.
OPTIONAL SYNTHESIZED FREQUENCY MODULE & RECEIVER
The R309DPS synthesized-frequency receiver
and matching transmitter frequency module are
supplied with the
PCM1024ZAPS and PCM
1024ZHPS systems. The transmitting and receiving
frequency may be easily changed without remov-
ing any crystals or exchanging frequency modules.
The ability to rapidly change frequency is a great
advantage on a crowded flying field or in contest
entry.
The receiver will also work with any other
Futaba 1024 systems. For more information on
the synthesized system, refer to page 37.
CAUTION
If you are using the Synthesized transmit-
ter module FP-TK-FSS, be sure that you
know the transmitting frequency before
switching on. If you don't know the fre-
quency, hold the A or R key down as you
switch on power. The transmitting frequency
will be displayed but radio transmission is de-
activated. Once you have determined the fre-
quency, secure the appropriate frequency
control device and turn on power to operate
normally.
Manual Introductory Section, Page 22
