Manual Introductory Section
POWER ON SCREEN DISPLAYS
After the transmitter's power switch is turned
on, the current model number and name is dis-
played (see next page for what happens on the
initial turn-on). Check to verify it is the desired
model, otherwise you will have to change it in the
System menu. There may also be a caution mes-
sage displayed for any special mix functions and/
or non-default flight condition switches that are
turned on. This caution message will be accompa-
nied by a warning sound of six beeps repeated
every two seconds, and will continue until the off-
ending switch is deactivated. You may hit the END
key, or wait a few moments to display the starting
screen.
The Home screen displays the user's name, the
active model memory and flight condition, the
Timer #1 display, the system voltages, and the
trim status. The selection keys to the various
menus are also displayed. To switch to these dif-
ferent screens, press the desired key A to R .
BE SURE TO CHECK THE MODEL NAME AND
CONDITION BEFORE FLIGHT. One of the most
common crash causes is taking off with the wrong
model setup loaded in the transmitter.
• Displayed for several seconds
- Currently selected model
number and name
• Immediate switch to
start screen
Manual Introductory Section, Page 11