Common Condition Section
Mode selection
Linear Mode Mixing
Press the Mode Selection A key. then press the NXT
To set the linear mode, do the following: press the A
L key to get to the mode setting menu. To choose the
key, then press the LIN H key. This automatically
E X P 1 mode, press the EX1 I key. If you want the
sets the side A and side B rate curves to —16%, to ap-
EXP2 mode, press the EX2 J key.
proximate linear response.
Side A curve rate setting
Ending
Set the rate as described earlier. If you need to change
Press the
the polarity of the exponential response, use the +/-
menu.
F key
Side L rate setting
Set the rate as described earlier. Note this setting is
not available for EXP2 mixing.
END N
key to exit to the Condition
Common Conditions Section, Page 63