Steering trim display
Throttle trim display
Steering D/R DL1
ATL DL2
ATL display
Steering D/R
display
DT2
DT3
DT1
17
B
ef
or
e Usi
ng
Trim Operation
Digital Trim Operation
(Initial settings: DT1: Steering trim, DT2: Throttle trim, DT3: -------)
Digital trims can be used in 2 ways:
Operating by the lever: Push the lever to the left or right (up or down) Operating by push
button switch: Press the push button switch in the desired direction. The current position
is displayed on the LCD screen in the bottom three rows of the list. However, this opera-
tion cannot be performed when the trim/dial lock (p.22) function is set.
• Each step is indicated by a tone.
• When the trim exceeds the maximum trim adjust
-
ment range, the beep will change and the servo
will not move any farther. Return to the neutral
position (center) by pressing both the push button
switches simultaneously for about one second.
• Trim lever adjustments have no effect on the maxi
-
mum servo travel.This prevents the linkages from
binding when adjustments are made.
Grip Dial Operation
(Initial setting: DL1; Steering D/R, DL2; ATL)
Operate the dials by turning them. The current set value is displayed on the LCD screen.
However, this operation cannot be performed when the trim/dial lock (p.22) function is set.
• Each step is indicated by a tone.
• When the trim exceeds the maximum trim adjustment range, the tone will change pitch and the servo will not
move any farther.
With the center trim feature, trim adjustments have no effect on the maxi-
mum servo travel. This prevents the linkages from binding when adjust-
ments are made.
Summary of Contents for 4PK-2.4G SuperR
Page 1: ...INSTRUCTION MANUAL 1M23N20721...
Page 142: ......
