FUTABA 4PK-2.4G SuperR Instruction Manual Download Page 74

Page: 74 / 142

3CH

4CH

2CH

4CH

tio

Brake Mixing "BRAKE"

(Throttle, 3rd channel system)

This function is used when the front and rear brakes must be adjusted independently

such as a 1/5 scale GP car. This mixing uses the 2nd CH for the rear brakes and the 3rd

or 4th CH for the front brakes, or controls the front brakes with the 3rd CH and 4th CH

servos, or controls the 2nd CH by independent throttle and controls the rear and front

brakes with the 3rd CH and 4th CH. In addition, mixing which varies the 3rd CH and

4th CH brake rate in proportion to steering operation is also possible.

-When braking, mixing is applied to 2nd CH 3rd CH, 4th CH.
-3rd CH and 4th CH brake amount, 2nd CH, 3rd CH, and 4th CH brake delay, and 3rd

CH and 4th CH brake EXP and ABS can be set.
-Steering mixing which varies front brakes 3rd CH and 4th CH matched to the steering

operation can be set. Front brakes 3rd CH and 4th CH can be individually weakened

according to the steering left or right operation amount.

Operation

Front Brake

Rear Brake

It is possible to adjust the Brake Return Amount (ABP), Delay Amount (DLY) and

Cycle period (CYC) exclusively for the front brake (the 3rd or 4th CH). In doing so,

you can use the A.B.S. Function at the front side even if the A.B.S Function is off for

the rear brake (2nd CH). You can use the same procedure as the 2nd CH A.B.S Func-

tion for setting the Cycle Period (CYC), Duty Ratio (DTY) and Steering Mixing (STM).

Use PS1, PS2, PS3 to switch the 3rd and 4th channel A.B.S. function ON/OFF.

3rd, 4th chnnels A.B.S.

Brake Mixing "BRAKE"

When "CUT OFF", which prohibits trigger brake side operation, was set in the boat

mode (p.78), the brake mixing function will not actually operate even if set.

When

TRG-BRK

was set to

CUT OFF

by boat mode function

When "4WS MIX" (p.88) or "GYRO MIX" (p.92) was set to ON by special mixing the

3rd CH of this brake mixing function cannot be used and when "DUAL ESC" (p.90) or

"CPS MIX" (p.94) was set to ON, 4th CH brake cannot be used.

Setting Special mixings

Summary of Contents for 4PK-2.4G SuperR















































































































































Search results

Summary of Contents for 4PK-2.4G SuperR

Reviews:

Related manuals for 4PK-2.4G SuperR

Brands by name

Popular brands

FUTABA 4PK-2.4G SuperR, Instruction Manual

Search results

Summary of Contents for 4PK-2.4G SuperR

Reviews:

Related manuals for 4PK-2.4G SuperR

Brands by name

Popular brands