FUTABA 4PK-2.4G SuperR, Instruction Manual

Page: 59 / 142

Setup items
RATE :Forward side rate
TG.P :Curve switching
point
FWD-TYP :Forward side curve
selection
BRK-EXP :Brake side rate
Setup item selection
- Select by (JOG) button up or down operation.
Switching point
A ver tical cursor line that
shows the cur ve switching
point is displayed on the setup
screen graph.
59
Fu
nc
tio
n
(Preparation)
- With the jog dial, move the blinking cursor up or down to select "FWD-
TYP". Use the plus (+) or minus (-) keys to select "VTR".
- With the jog dial, move the blinking cursor up or down to select "RATE"
and make the following adjustments:
1
Forward side adjustment
Use the plus (+) button to adjust for a faster response. Use the minus (-)
button for a slower or mild response.
-Plus (+) button- the higher the number goes on the positive side, the
faster the response will be at center of throttle response.
-Minus (-) button- the higher the number goes on the negative side, the
milder or softer it is in the center of the throttle response.
2
Curve switching point adjustment
With the jog dial, move the blinking cursor up or down to select "TG.P".
Use the plus (+) or minus (-) buttons to move the point you prefer. This
gives you the opportunity of switching the curve point in relation to the
throttle trigger position.
3
Brake side adjustment
With the jog dial, move the blinking cursor up or down to select "BRK-
EXP". Use the plus (+) button to adjust for a faster brake response or
use the minus (-) button for a slower or milder brake response.
4
When ending setting, return to the initial screen by pressing the (END)
button twice (for function menu screen, press the (END) button once).
Adjustment method for VTR curve
Throttle EXP "THEXP"
Adjustment range
RATE :-100 ~ 0 ~ +100%
FWD-TYP :EXP, VTR, CRV
TG.P :20 ~ 80%
BRK-EXP :-100 ~ 0 ~ +100%
For the VTR curve, only the
high side can be set. The
brake becomes the EXP
curve.
Curve type Select button
- Select with the (+) or (-) but -
tons.
Adjust buttons
Adjust with the (+) and (-) but -
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Initial value:
RATE and BRK-EXP "0"
TG.P "50"