92
Fu
nc
tio
n
Gyro Mixing "GYRO MIX"
This function is a remote gain function which adjusts the sensitivity of the Futaba car
rate gyro at the T4PKSR side, and is mixing that uses the 3rd CH to adjust the gyro sen-
sitivity.
When using the 4PKRS by switching the AVCS and normal modes use PS1, PS2 or PS3
with the function select switch function (p.96).
For a description of the car rate gyro mounting method and handling, refer to the rate
gyro instruction manual.
When the 3rd CH was set to ACT at Brake Mixing (p.74) or when 4WS Mixing (p.88)
is used, Gyro Mixing cannot be used.
Setting Special mixings
AVCS / NORMAL Modes
The gyro has 2 operating modes: NORMAL mode and AVCS mode. In the AVCS mode, the angle
is controlled simultaneously with NORMAL mode rate control (swing speed). The AVCS mode in-
creases straight running stability more than that of the NORMAL mode. Because the feel of opera-
tion is different, choose your favorite mode.
NORMAL
Countersteers against outside
force, but cannot correct the
skid direction.
AVCS
Corrects the skidding direc-
tion and forcefully maintains
the heading.
Outside
force
Outside
force
Press t
he
button
Special Mixes "S-MIX" (GYRO MIX)
The display is different depending on
the type selected with MODE. The fig-
ure shown below is for the SW SEL.
When the set SW is operated
in the opening screen state,
the Gyro mode is displayed
here for about 1 seconds.
Displayed when the Gyro Mode
SW is not used.
Summary of Contents for 4PK-2.4G SuperR
Page 1: ...INSTRUCTION MANUAL 1M23N20721...
Page 142: ......
