86
＜
Linkage Menu
＞
HELI
COPTER
AIRPLANE
GLIDER
●Return to Linkage Menu
●to [SWAP]
● Touch the [Function] button in the Linkage Menu
to call the setup screen shown below.
Function
Channel assignment for each function can be changed
to suit your needs.
When you select model and wing (swash) types, you
will ind that the optimized combinations of servo output
channels and functions have been already preset. If
you would like, on the function-setting screen of the
linkage menu, you can freely change combinations of
servo output channels, functions (aileron, elevator, etc),
and input controllers (sticks, switches, trim levers and
trim switches). You can also assign the same function to
multiple servo output channels such as assigning elevator
function to CH2 and CH3.
(The display screen is an example. The screen depends on the model type.)
Function change
1. Touch the function button of the channel you want
to change to call the function list.
2. Select the function you want to change.
3. Touch [Yes]. The display returns to the original
screen. (When you want to cancel function
change, touch [No].)
*Multiple (MPDX-1) channels can be assigned to 1
function.
*Multiprop1, 2 is an optional object for Multiprop
decoders.
<CH which can be Multiprop set up.>
FASSTest 18CH/T-FHSS --- 1-12CH
FASSTest 12CH --- not set
FASST MULTI
--- 11, 12CH
FASST 7CH --- not set
T-FHSS, S-FHSS
--- not set
DG1, DG2 (switch channels)
These two channels can be used as switch (On/Off)
channels. You can freely change combinations between
servo output channels and input controllers
(sticks, switches, trim levers and trim switches).
Channel restrictions by a System Type
FASSTest 18CH/T-FHSS---16 CH+2 Switch
FASSTest 12CH ---10 CH+2 Switch
FASST MULTI ---16 CH+2 Switch
FASST 7CH --- 7 CH
S-FHSS --- 8 CH
Operation control change
1. Touch the control button of the channel you want
to change. A control select screen (stick, switch,
knob, trim lever, etc.) is displayed.
2. Select the control you want to operate.
3. Touch [Close]. The display returns to the preceding
screen.
*The same control can be assigned to multiple
channels.
*Select PCM-G3 for operation mode of multi-prop MPDX-1.
