64
＜
System Menu
＞
HELI
COPTER
AIRPLANE
GLIDER
Switch selection
1. Select the switch type by touching the [Type]
button corresponding to the switch to be replaced.
[Lever]: Toggle switch
[Button]: Push button
[Dial]: Knob
●Setting for toggle switch is shown above.
2/3 position selection
1. Touch the "Posi." button corresponding to the
switch and select the position type.
[2 Posi]: 2 position
[3 Posi]: 3 position
Toggle switch type setting (Setting when the switch was replaced.)
If you modify the location of the switches on the right
and left (top) of the transmitter, you should be sure to re-
assign functions to the switches for proper operation.
A “Lock” is included to prevent settings from being
modiied by mistake. When you need to change settings,
unlock this by pressing “Lock”. It will then read “Unlock”
and you can make changes as required.
● Touch the [Switch]
button in the System Menu to call up
the setup screen shown below.
●Return to System Menu
[Alt/Mom] mode selection
1. Select the operation mode by touching the [Alt/
Mom] button corresponding to the switch.
[Alt.]: Alternate type
[Mom.]: Self-return type
● Selection of the [Mom.] mode with a 3-position
type switch is shown above.
"3P Mom" mode selection
1. Select the operation mode by touching the "3P
Mom" button corresponding to the switch.
[Single]: One-side self-return type
[Dual]: Both directions self-return type
Switch
