76
＜
Linkage Menu
＞
HELI
COPTER
AIRPLANE
GLIDER
Servo Monitor
Servo Test & Graph Display/Displays servo
positions.
This is used for testing servo movement. Touch “Moving
Test” (repetition mode) or “Neutral Test” (ixed position
mode) depending on which one shows on the screen. To
get from one to the other, simply touch the ield again,
and you will move from “Moving Test” to “Neutral Test”
●Return to Linkage Menu
● Touch the [Servo Monitor] button in the Linkage Menu to call the
setup screen shown below.
automatically. Next touch the “Test” on/off button to start
testing your servos. The “Neutral test” is good for inding
the neutral position of a servo horn.
Servo test operation
1. Select a test mode ([Moving] or [Neutral]).
[Repeat]: Each servo repeats operation.
[Neutral]: Each servo is locked in the neutral
position.
2. When the [Test Off] button is touched, testing
begins in the selected mode.
Control name
Function name
WARNING
Don't set a servo test mode when the drive
motor is connected and the engine was started.
■
Inadvertent rotation of the motor or acceleration of the
engine is extremely dangerous.
