Furuno RP-17, Operator'S Manual

Page: 29 / 48

8-1
8.1 Formatting Memory Cards
Before you can save information to a memory
card you must prepare its surface by format-
ting it. Formatting is a routine procedure you
must perform on new cards before you can
use them with this unit. You have to initialize
them only once. You can format cards you’ve
used before, however, in which case all prior
information on them is erased.
1. Press [MENU], [1], [1], [8], [8], [2], [2], [0],
[0].
2. Press [2] to select Left or Right, followed
by the [ENTER/SELECT] key and the
[MENU] key.
3. Insert a blank memory card in the card
slot label side left.
4. Press the [MENU] key.
5. Press the [1] key twice to select Video
Plot.
6. Press the [8] key twice to select Memory
Card.
Figure 8-1 Memory Card menu
8. MEMORY, MEMORY CARD
7. Press the [2] key twice to select Save
Data.
Figure 8-2 Save Data menu
8. Press the [9] key twice to select Format.
9. As the screen prompts, press the [EN-
TER/SELECT] key to format the card.
“Formatting” appears while the card is
being formatted, and “Formatting com-
pleted” when formatting is completed.
10.Press the [MENU] key to finish.