Furuno RP-17, Operator'S Manual

Page: 22 / 48

5-4
9. Press the [ENTER/SELECT] key.
10.As the screen prompts, place the cursor
on point for the route.
11. Press the [+] key. (To clear just-selected
point, press the [-] key.)
12.Repeat step 10 and 11 to complete the
route.
13.Press the [ENTER/SELECT] key to reg-
ister the route and the [MENU] key to
close the menu.
Creating routes with waypoints
1. Press [MENU], [1], [1], [5], [5] to display
the Route menu.
2. Press the [1] key to select WPT no., and
press the [ENTER/SELECT] key.
3. Press the [2] key to select Speed for TTG.
4. Key in ship’s speed with the numeric keys.
(This allows for automatic calculation of
time-to-go to waypoints.)
5. Press the [ENTER/SELECT] key.
6. Select route number with the trackball.
7. Press the [ENTER/SELECT] key. The
screen for selection of waypoint number
appears.
Reg. Route (No. )
WPT Nos. =
- -+- -+- -+- -+ -+- -+- -+- -+- -+
- -+- -+- -+- -+ -+- -+- -+- -+- -+- -+
- -+- -+- -+- -+ -+- -+- -+- -+- -+- -+
(Waypoint List)
No. Comment
›
1 0000.000’N 00000.000’E ABCDEFGHJK
2 0000.000’N 00000.000’E 9876543210
3 . ’N . ’E
4 . ’N . ’E
5 . ’N . ’E
9 . ’N . ’E
10 . ’N . ’E
20 . ’N . ’E
99 . ’N . ’E
Select WPT and press +key.
To cancel, press -key.
Repeat above steps and press ENT to conclude.
s
Figure 5-5 Screen for entering
route by waypoints
8. Select waypoint number with the cursor
and press the [+] key. (You may also en-
ter waypoint number with the numeric
keys in which case omit the pressing of
the [+] key.)
9. Repeat step 8 to complete the route.
10.Press the [ENTER/SELECT] key.
11. Press the [MENU] key to finish.
Creating routes through the route
list
1. Press [MENU], [1], [1], [5], [5] to display
the Route menu.
2. Press the [1] key to select List, and press
the [ENTER/SELECT] key.
3. Press the [2] key to select Speed for TTG.
4. Key in ship’s speed with the numeric keys.
(This allows for automatic calculation of
time-to-go to waypoints.)
5. Press the [ENTER/SELECT] key.
6. Select route number with the trackball.
7. Press the [ENTER/SELECT] key. The
screen for selection of route points ap-
pears.
WPT Skip Distance TTG
s
1 08 YES
2 11 NO 2345.67 nm12345.6H
3 15 YES 2345.67 nm12345.6H
4 18 NO 2345.67 nm12345.6H
5 22 NO 2345.67 nm12345.6H
6 NO . nm . H
7 NO . nm . H
8 NO . nm . H
9 NO . nm . H
10 NO . nm . H
30 NO . nm . H
Route (No. 01)
Move cursor and enter WPT no.
Skip: No Skip: +
Delete: CLR Conclude: ENT Escape: MENU
Figure 5-6 Screen for making route