Furuno RP-17, Operator'S Manual

Page: 15 / 48

4-1
4.1 Entering Marks, Lines
You can inscribe marks and lines on the dis-
play to denote important locations such as
fishing spots, buoys, islands, etc.
Entering marks on the radar display
Selection of mark entry method
Marks may be entered on the radar display
by cursor, latitude and longitude position and
own ship’s position.
1. Press the [MENU] key.
2. Press the [8] key twice to display the Mark
menu.
Figure 4-1 Mark menu, radar mode
4. MARKS, LINES
3. Press the [1] key to select Mark Selec-
tion. Use the numeric keys to enter mark
or line number desired.
4. Press the [ENTER/SELECT] key.
5. Press the [4] key to select mark/line entry
method desired; cursor, L/L, or own ship
position.
6. Press the [ENTER/SELECT] key. Follow
“Entering marks by cursor,” “Entering
marks by latitude and longitude position,”
or “Entering marks at own ship’s position”
on“Entering marks by cursor”.
Entering marks by cursor
1. Select Cursor at step 5 in “Selection of
mark entry method.”
2. Place cursor on location where to inscribe
a mark.
3. Press the [MARK] key.
4. To enter a line, repeat steps 2 and 3.
Note: To inscribe another line, press the [1]
key, key in line number (type) shown on the
Mark menu, press the [ENTER/SELECT] key,
and the repeat steps 2 and 3. To inscribe
more than two of the same type of line, after
completing a line, press [1] [2] [1] to select
Erase Mark, press the [ENTER/SELECT] key
and then press [1] to select line type.
Entering marks by latitude and longi-
tude position
1. Select L/L at step 5 in “Selection of mark
entry method.”
2. Key in latitude and press the [ENTER/
SELECT] key.
3. Key in longitude and press the [ENTER/
SELECT] key.
4. Press the [MENU] key.