Furuno FI-70, Operator'S Manual

Page: 71 / 98

5. INSTALLATION AND INITIAL SETTINGS
5-9
Connection via the FI-5002 junction box (option)
The FI-5002 has two terminal resistors (R1 and R2). The resistors are set in the
following manner:
• When no backbone cable is connected, R1 and R2 are set to ON position.
• When one backbone cable is connected, either R1 or R2 is set to ON position.
• When two backbone cables are connected, R1 and R2 are set to OFF position.
5.3 Input/Output PGNs
The FI-70 can input/output the following PGNs.
Input PGNs
PGN Description PGN Description
059904 ISO Request 129285 Navigation - Route/WP Information
060928 ISO Address Claim 129538 GNSS Control Status
061184 Self Test Group Function 129539 GNSS DOPs
126208 NMEA - Request/Acknowledge
Group Function 129794 AIS Class A Static and Voyage
Related Data
126992 System Time 129809 AIS Class B “CS” Static Data Report,
Part A
126996 Product Information 129810 AIS Class B “CS” Static Data
Report, Part B
127237 Heading/Track Control 130306 Wind Data
127245 Rudder 130310 Environmental Parameters
127250 Vessel Heading 130311 Environmental Parameters
127251 Rate of Turn 130312 Temperature
127252 Heave 130313 Humidity
127257 Attitude 130314 Actual Pressure
127258 Magnetic Variation 130316 Temperature, Extended Range
127488 Engine Parameters, Rapid Update 130576 Trim Tab Status
127489 Engine Parameters, Dynamic 130577 Direction Data
127493 Transmission Parameters, Dynamic 130578 Vessel Speed Components
127497 Trip Parameters, Engine 128267 Water Depth
127505 Fluid Level 065280 Proprietary PGN (Furuno)
128259 Speed, Water Referenced 130816 Proprietary PGN (Furuno)
129025 Position, Rapid Update 130818 Proprietary PGN (Furuno)
128267 Water Depth 130821 Proprietary PGN (Furuno)
129026 COG & SOG, Rapid Update 130822 Proprietary PGN (Furuno)
129029 GNSS Position Data 130825 Proprietary PGN (Furuno)
129033 Local Time Offset 130841 Proprietary PGN (Furuno)
129038 AIS Class A Position Report 130822 Proprietary PGN (Furuno)
CN1 CN1
CN3 CN3 CN4 CN4 CN5 CN5 CN2 CN2
R2 R1
CN3 CN4 CN5
CN2
CN2
: Resistor is
disconnected. (OFF)
: Resistor is
connected. (ON)
Jumper block settings