Furuno FI-70, Operator'S Manual

Page: 41 / 98

3. ALARMS
3-7
3.8 Engine Alarms
The engine alarm is activated when the FI-70 receives information containing errors
or alarms from the engine.
The indicators shown in the table below are normally displayed in gray when the
engine category is selected. When an alarm is active, the corresponding indicator
flashes and the color changes to an orange-red.
1. Access the [Alarms] menu, using the procedure outlined on page 3-1.
2. Press the
software keys to select [Engine Alarm], then press the function key.
3. [Alarm] is highlighted, press the function key.
4. Select [OFF] or [ON] as appropriate, then press the function key.
• [OFF]: Disable the alarm. Proceed to step 7.
• [ON]: Enable the alarm.
5. Press the software keys to select the threshold, then press the function key.
6. Press the software keys to set the threshold as appropriate, then press the func-
tion key to apply the changes.
7. Press the Menu/Back key twice to close the menu.
Indicator Cause/location of problem
Engine control system.
Battery.
Coolant.
Oil pressure.