Furuno FI-70, Operator'S Manual

Page: 70 / 98

5. INSTALLATION AND INITIAL SETTINGS
5-8
How to fabricate the cable and MC connector
5.2.4 Terminator resistors
Terminator resistors are required to close off the network ends, completing the
network.
The following FURUNO terminator resistors are available:
Direct connection to the CAN bus/NMEA2000 backbone
Install terminator resistors to both ends of the CAN bus/NMEA2000 network backbone
cable.
Part name Type Code No. Remarks
NMEA
Connector LTWMN-05AMMT-SL8001 000-160-508-10 Mini connector, male
LTWMN-05AFFT-SL8001 000-160-509-10 Mini connector, female
LTWMC-05BMMT-SL8001 000-168-604-10 Micro connector, male
LTWMC-05BFFT-SL8001 000-168-605-10 Micro connector, female
Screw
Core
Twist
MC connector
Drain wire
How to insert cores:
1. Twist the cores.
2. Unfasten the screw with Philips head screwdriver.
3. Set the core to hole.
4. Tighten the screw.
5. Pull the wire to confirm connection.
Sheath Sheath
6 mm
Wire Connection
Point
Signal
Drain
Red
Black
White
Blue
SHIELD
NET-S
NET-C
NET-H
NET-L
1
2
3
4
5
Terminator Terminator
CAN bus/NMEA2000 Backbone
FI-70
SC-30