Furuno FI-70, Operator'S Manual

Page: 74 / 98

5. INSTALLATION AND INITIAL SETTINGS
5-12
9. Where the vessel type is set to [Engine Motor], press the software keys to select
[Engine Setup], then press the function key. If the vessel type is set to [Power
Boat] or [Sailboat], press the Menu/Back key to complete the initial setup.
10. With [Number of Engine] selected, press the function key.
11. Press the software keys to select the number of engines on the vessel, then press
the function key.
The FI-70 may display up to three engines’ data. The menu items displayed in the
[Engine Setup] menu change according to the number of engines selected here.
12. Select the engine to be used as the data source.
Note: Engine numbers are assigned at each engine.
Where [Number of Engine] is set to [1]
• [Engine Assign] : Select the engine number to be displayed.
Where [Number of Engine] is set to [2]
• [Engine PORT] : Select the engine number to be displayed on the left side of
the screen.
• [Engine STBD] : Select the engine number to be displayed on the right side of
the screen.
Where [Number of Engine] is set to [3]
• [Engine PORT] : Select the engine number to be displayed on the left side of
the screen.
• [Engine STBD] : Select the engine number to be displayed on the right side of
the screen.
• [Engine Center] : Select the engine number to be displayed in the middle of the
screen.
Ent Ent Ent
Engine Assign: 1
Engine
Engine Alarm
Engine PORT: 1
2
Engine
Engine STBD:
Engine Alarm
Engine PORT: 1
2
3
Engine
Engine STBD:
Engine Center:
Engine Alarm
One engine Two engines Three engines
Eng. Temp. ºF
x1000 x1000
2600 3320
136
°F
-16
°F
Engine
selected as
[Engine PORT]
Engine
selected as
[Engine STBD]