Furuno CSH-5LMARK-2, Installation Manual

Page: 51 / 86

3. ADJUSTMENTS
3-5
PORT 1 FORMAT, PORT 2 FORMAT
Set format of equipment connected to NMEA1/CIF1 port or NMEA2/CIF2 port.
1. Rotate the [RANGE] control to select PORT 1 FORMAT or PORT 2 FORMAT ap-
propriately.
2. Rotate the [GAIN] control to choose NMEA or CIF depending on the equipment
connected.
NAV DATA
Choose source of nav data among GPS, LC (Loran C), DR (Dead Reckoning) or ALL.
“ALL” automatically chooses source in the order of GPS, Loran C and dead reckoning.
(Priority: GPS>LC>DR)
1. Rotate the [RANGE] control to select NAV DATA.
2. Rotate the [GAIN] control to choose item appropriately.
Select “DR” when using the equipment connected to GYRO port and LOG port.
3.4 Setting GPS Navaid Smoothing
If position data from the GPS navigator is not smooth, set DIP switch S2 in the proces-
sor unit as below to smooth it.
Location of DIP switch S2 and S3
#3 #4 GPS course change
ON ON 10°
ON OFF 20°
OFF ON 45°
OFF OFF 90° (default setting)
#5 #6 GPS ship’s speed average
ON ON 2.0 kn
ON OFF 1.5 kn
OFF ON 1.0 kn
OFF OFF 0.5 kn (default setting)
#7 Smoothing function
ON Yes
OFF No (default setting)
10P7049A
J22J25
MAIN Board