Furuno CSH-5LMARK-2, Installation Manual

Page: 28 / 86

2. WIRING
2-2
2.1.3 Hull cable between hull and pre-amplifier units
The hull cable is pre-connected to the hull unit. The other end is fitted with connector.
*1
*1
*2
Hull unit
Pre-amplifier unit
T
ransceiver unit
CN-C3
CN-C2
CN-B2
CN-B3
Transducer cable
Hull unit cable
TX cable ø18.3 S10-7-5 (5 m) S10-7-10 (10 m) S10-7-15 (15 m) RX cable ø28.4 10S1562 (5 m) 10S1583 (10 m) 10S1584 (15 m)
S06-6-10
(5-5P),10 m
Motion sensor MS-100
Processor unit
Processor cable ø18.3 S10-6-15 (15 m) S10-6-30 (30 m) S10-6-50 (50 m)
REMOTE
CN-A1
Ship's mains 100/1
15/200/220/240 V
AC
1ø, 50-60 Hz
DPYCY-4 (Shipyard arrangement, 50 m)
DC-AC inverter TR-2451
Ship's mains 24 VDC
Control unit
DPYCY-6 (Shipyardarrangement, 5 m)
*1: Fabricate cables locally
.
*2: For other connection of external equipment
to the processor unit, see page 2-14.
Display unit (User supplied)
Display cable 3COX-2P-6C 5M, 5 m 3COX-2P-6C 10M, 10 m
5 m/10 m