Furuno CSH-5LMARK-2, Installation Manual

Page: 17 / 86

1. MOUNTING
1-9
11. Set the main shaft so that the bow mark faces ship’s bow, and then tighten the
shaft retainer.
Hull unit, orienting bow mark
HULL UNIT KIT
Name Type Code No. Qty Remarks
Raise / Lower Drive
Assembly – – – Specifications according to or-
der.
Transducer – – –
Main Shaft – – –
Retraction Tank – – –
Main Body Flange
Assembly CSH-5040/41/
7030/31/8040 006-976-510-00 1
Waterproof Attach-
ment 10-044-2321 006-970-810-00 1 Only for CSH-5040-A/ 5041-A
Tank Guide CSH-504*/804*/
703* 006-979-160-00 1
Zinc Ring For Main
Shaft CSH-5 000-802-966-00 1
Hex. Head Screw M20
u
80 000-162-826-10 8
Hexagonal Nut M20 000-167-476-10 8
Spring Washer M20 000-167-401-10 8
Flat Washer M20 000-167-452-10 16
Screw Wrench AL0500 000-167-051-10 1
Fastening Band 2X 44-60 000-801-924-00 1
Cable Fixing Band HP-18N 000-162-504-10 5
HP-5N 000-162-508-10 2
WARNING
Bow mark
Bow
Tighten bolts fixing shaft retainer
for torque of 35 to 38 N m.
If torque is less than the above,
water leakage may occur because
the shaft may loosen and fall.
Loosen shaft retainer
and rotate main shaft
so that the bow mark
faces ship's bow.